Shared on YouMagine – 3D printed RC truck V3 by MrCrankyface

3D printed RC truck V3 by MrCrankyface

MrCrankyface shared a 3D-printed RC truck that has been 12 months in the making!

Shared On YouMagine3D printed RC truck V3 by MrCrankyface:

After roughly 12 months development, this is what has come of it!

It’s an almost fully printable RC truck with gearbox and AWD drivetrain.

  • Each differential works as a real one but you can replace the internals with
    “truckv3_axle_difflock” to have a locked diff with more grip.
  • It has two axles in the files, select the one you want.
    Axle1 has dual rear tyres, Axle2 has single rear tyres.
    Axle2 also has 2 choices in rims.
  • The frame can be printed in 2 or 4 pieces, depending on how big your print surface is.
  • Use the “split” files if you have a small printbed.

All you need to build this, besides a lot of filament, is screws/nuts, bearings and electronics.

This was a huge project to develop and upload so please let me know if anything is missing or unclear!

Assembly videos of most parts to aid you in building can be found on my youtube channel….

3D printed RC truck V3 02

Visit this design on!